MG1310

MG1310

Glass Composite pH Electrode

Feature

American electrode；The circular ceramic boundary is adopted；

Double boundary reference electrode, cable end with metal head；

Specifications

Test range：0~14pH Pressure range：0.6Mpa  Temperature range：-5~-100℃  

Membrane impedance：100MΩ  Reference electrode：Ag/AgCL

  • Image Name

    MG1310

    Glass Composite pH Electrode

    Feature

    American electrode；The circular ceramic boundary is adopted；

    Double boundary reference electrode, cable end with metal head；

    Specifications

    Test range：0~14pH Pressure range：0.6Mpa  Temperature range：-5~-100℃  

    Membrane impedance：100MΩ  Reference electrode：Ag/AgCL

  • Image Name

    MG1311

    Glass Composite ORP Electrode

    Feature

    American electrode；The circular ceramic boundary is adopted；

    Double boundary reference electrode, cable end with metal head；

    Specifications

    Test range：+-5000MV Pressure range：0.6Mpa  Temperature range：-5~-100℃  

    Membrane impedance：100MΩ  Reference electrode：Ag/AgCL

  • Image Name

    POLILYTE PRO 120 FC5 HAMILTON

    Glass Composite pH Electrode

    Feature

    Hole technology to replace common ceramic membrane technology, porous ceramic is 200 times larger

    POLISOLVE The reference was a lot of resistance to organic solvents

    In low conductivity samples equally well

    Specification

    Test Range: 0...14pH Pressure

    range: 0.6MPa Temperature range: 0...60

    The minimum sample conductivity: 2us/cm  

    Reference electrolyte: POLISOLVE

  • Image Name

    MG1205

    Glass Composite pH Electrode

    Feature

    Made in German High stability Resistant to pollution Special reference design

    Specification

    Test Range: 0...14pH Pressure range: 0. 6MPa

    Temperature range: -5...+70̊C

  • Image Name

    MG1207

    Glass Composite pH Electrode

    Characteristic

    German imported electrode, process industrial use

    annular ceramic hole pollution resistance

    Specifications

    Test range：0~14pH Glass length：120mm Maximum pressure：1bar at 20℃

    Temperature range：-5~+70℃  Minimum conductivity：>150us/cm

    Joint: PG13.5Thread,Out of line

  • Image Name

    MG1208

    Anti Hydrofluoric Acid Electrode

    Characteristic

    German imported electrode

    Specifications

    Test range: 1-11PH Maximum pressure：1bar at 20℃

    Temperature range: 0~60℃

    Electrode material: S-GLASS-BALL  

    Joint: PG13.5Thread,Out of line

  • Image Name

    MG1207ORP

    Glass Composite Electrode

    Characteristic

    German inlet electrode; high stability; special reference design

    Specifications

    Test range:-1500-1500mV  Maximum pressure：1bar at 20℃  Temperature range：-5~+70℃

    Minimum conductivity：>150us/cm  Joint: PG13.5Thread,Out of line

  • Image Name

    MG1202

    Glass Composite pH Electrode

    Feature

    Adopt annular stain Junction Teflon resistant to pollution Corrosion resistance

    Specification

    Test range: 0...14pH/1000mV   Pressure range: 0. 6MPa   Temperature  range:  0... 9 0  ̊C

  • Image Name

    MG1202ORP

    Glass Composite pH Electrode

    Feature

    Adopt annular stain Junction Teflon resistant to pollution Corrosion resistance

    Specification

    Test range: 0...14pH/1000mV   Pressure range: 0. 6MPa   Temperature  range:  0... 9 0  ̊C

  • Image Name

    MPC1202

    Two Composite

    Feature

    Adopt annular stain Junction Teflon resistant to pollution

    PC/PET material, easy to install  3/4 NPT teeth mouth for easy installation  

    Composite pH, reference/Warming/solution ground capabilities  

    Specification

    Test range: 0...14pH/1000mV  Pressure range: 0.6MPa

    Temperature range:0...80 ̊C 0...90 ̊C(MPS1312 only)

  • Image Name

    MPC1312

    Three Composite

    Feature

    Adopt annular stain Junction Teflon resistant to pollution

    PC/PET material, easy to install  3/4 NPT teeth mouth for easy installation  

    Composite pH, reference/Warming/solution ground capabilities  

    Specification

    Test range: 0...14pH/1000mV  Pressure range: 0. 6MPa

    Temperature range:0...80  ̊C 0...90  ̊C(MPS1312 only)

  • Image Name

    MPS1312

    Four Composite pH Electrode

    Feature

    Adopt annular stain Junction Teflon resistant to pollution

    PC / PET material, easy to install  3/4 NPT teeth mouth for easy installation  

    Composite pH, reference / Warming/ solution ground capabilities  

    Specification

    Test range: 0...14pH/1000mV  Pressure range: 0. 6MPa

    Temperature range: 0...80 ̊C 0...90 ̊C(MPS1312 only)

  • Image Name

    MPC1202ORP

    Two Composite / Three Composite / Four Composite pH Electrode

    Characteristic

    Mining ring,Teflon Junction,Resistance to pollution；PCMaterial/PPS material，3/4NPTTecth

    Reference/temperature filling/solution grounding and other functions

    Specifications

    Temperature range：0~80℃  Test range：0~1000mV  Pressure range：0.6MPa

  • Image Name

    PT01

    Tube Plastic Shell Electrode Sheath

    Specifications

    Texture of material：PVC/PP  Size：202mm*Φ34mm  

    Fluid interface: up and down 3/4NPT pipe thread

  • Image Name

    PT02

    Pipe Type Stainless Steel Electrode Sheath

    Specifications

    Texture of material：SUS 316L  Size：136mm  

    Fluid interface: up and down 3/4NPT pipe thread

  • Image Name

    FC01

    Flow Cell Electrode
  • Image Name

    MF-01

    Floating Electrode Fixed Floating Vessel

    Specifications

    Size：600*Φ500*120mm(L*W*H)  Texture of material：PVC

  • Image Name

    Electrode Self Cleaning Device

    Specifications

    CLN01glass electrode  CLN02Plastic shell electrode  Interface:6.35mm

The above accessories are for reference only. Please select accessories according to the actual situation of the products.