DS-MG1202
pH Digital ElectrodeFeature
Circular ceramic hole
Strong resistance to corrosion
Specifications
Test range：0-14pH Pressure range：0.6MPa
Temperature range：0-90℃
-
DS-MG1202
pH Digital ElectrodeFeature
Circular ceramic hole
Strong resistance to corrosion
Specifications
Test range：0-14pH Pressure range：0.6MPaTemperature range：0-90℃
-
DS-MG1202T
pH Digital ElectrodeFeature
Circular ceramic hole
Strong resistance to corrosion
Measurement retention temperature
Specifications
Test range：0-14pH Pressure range：0.6MPaTemperature range：0-90℃
-
DS-MG1202OPR
OPR Digital ElectrodeFeature
Circular ceramic hole
Strong resistance to corrosion
Specifications
Test range：0-1000mV Pressure range：0.6MPaTemperature range：0-90℃
-
DS-MCS1407 The Quadrupole Conductance Digital Electrode
DS-MCS121 Dipole Conductance Digital ElectrodeFeature
In the solution of higher concentration, the electrode is not easy to be polarized, and the stability of the data is stable. Good reproducibility
Easy maintenance, the four electrodes on a flat surface is easy to clean
In low conductivity samples equally well
Specification
Constant：0.4~0.7 Test range：0~200mS/cm Temperature range：0-60℃
Pressure range：0.6MPa Mounting dimensions: 3/4NPT
-
DS-MTU-5000
Digital Turbidity ElectrodeFeature
Using precision optical components
Sensor Check electrode self-testw function to ensure reliable operation
Long-term stability Installation and maintenance easy
Specification
Test Range：0~100/500/5000NTU Reproducibility: Full range of + 2%
Pressure range：0.6MPa Temperature range：0~90℃
-
DS-MG1912
Membrane Oxygen Digital ElectrodeFeature
No need to replace film head, easy to use
Strong and durable, quick reaction, low water flow
Specifications
Test range：0-20.00ppm
Temperature sensor：NTC22K
Pressure range：0.4MPa
Temperature range：0-50℃
-
DS-NH4-N Digital Ammonia-oxygen Electrode
DS-N03-N Digital Ammonium Nitrate ElectrodeFeature
Adopt one-piece bracket, easy to install and replace parts
Selective measurement is not allowed to be sampled so that the measurement costs can not be greatly reduced
Specifications
NH4 S-003 0.1ppm-1200ppm
N03 S-004 0.3ppm-30000ppm
Protection level：IP67
Temperature and pressure：25℃/1013Kpa
Error range：Measuring range of 5％
-
MD 1900
Optical Dissolved Oxygen ElectrodeFeature
fluorescence principle , needn't to replace the membrane and electrolyte
Do not consume oxygen, no flow rate and agitation requirements, high accuracy
Automatic detection feature ensures that the measured value
No flow requirements, can be measured in still water
Specification
Range: 0...20mg/l(0...20ppm)0...200%SAT
Repeatability: 0.5%FS Screw connection: G1 Cable: 80m
T90:60秒 Material: Noumenon：SUS316L stainless steel titanium，
Phosphor layer cap: POM, Fluorescent layer: Silicon