MB-200-CN-1 Inductor Conductivity / Concentration Controller
COND-8310
Application area ：
It is widely applied to the concentration of CIP cleaning fluid in food and pharmaceutical process, the regeneration of acid and alkali in resin industry, the on-line monitoring of all kinds of acid and alkali salt concentration in electronic semiconductor and chemical industry.
Instructions Color
| Features： |
l 96*96Microcomputer intelligent design of electrical conductivity/concentration transmitter l Outdoor waterproof design suitable for wall, disk and round pipe installation l Large image LCM display, according to inductive backlight setting function l Graphic display symbol cleaning tool process guidance easy to operate l The input of an inductive electrode signal can simultaneously display the concentration, electrical conductivity and temperature of the material l Presupposition the conductivity/concentration curve of H2SO4, HNO3, HCl, NaOH, NaCl and other acid and alkali salts l Self defined conductivity/concentration curve of unknown substance l Manual/automatic correction, temperature compensation function and final correction information l Password lock and combination key enter setting and correcting mode design to enhance security protection l Provide the contact point of the electrode automatic cleaning device, the program set the output l Two 0/4~20mA output and RS-485 optional |
| Parameters： | ||
| Range/Resolution/Accuracy(±1Digit) | ||
| Conductivity | 0.0~2000mS/cm /0.1mS/cm /1%±1Digit | |
| Salinity | 0.00~100.0%(According to different chemicals)/0.1%/1%±1Digit | |
| Temp | -30.0℃~+130.0℃ /0.1℃ /0.2%±1Digit;With manual correction function | |
| Temp. compensation | 25℃linear，Automatic temperature compensationPT1000/NTC30K,Automatic identification; manual temperature compensation: key setting | |
| Temp. coefficient | Linear compensation for electrical conductivity (0.00%~20.00%) or nonlinear compensation | |
| Hi/Lo Relay Output | Contact output, ON 0~99 59 seconds /OFF 0~999 hour 59 minutes | |
| Analog Output | Two sets of ON/OFF connection output, high and low, retarded area arbitrary program setting, 240VAC/0.5A | |
| Wash Relay Output | 1 or 2 4~20mA analog signal output, the user can set the corresponding output value, load 500 Omega. | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 96mm×96mm×148mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 91mm×91mm (H×W) | |
| Weight | 0.4Kg | |
- Prev：MB-200-CN Conductivity Transmitter
- Next：