MB-200-ION Ion Concentration Transmitter
ION-7300 Ion Concentration Transmitter
Application area ：
Widely used in semiconductor, pv, metallurgy,fluorine chemicals Build fluoride, such as industrialwaste water, waste gas treatment, emissions monitoring and various Ion monitoring and otherfields
Instructions Color
| Features： |
l 96*96 microprocessor Ion transmitter l Waterproof & dustproof proof design, to fit wall/panel/pipe installation l Automatic sensor clean function with programable time interval and hysteresis l Large LCM display, with operating status and special symbols l With backlight sensor, automatic and manual backlight setting function l Provides the solution ground, it can eliminate the interference from sample of water l Provides digital filter function , can filter out interference value , to make the reading more stable l Automatic calibration; manual/auto. temperature compensation l With password and multi-key design、security protection enhancement l Equipped RS-485 MODBUS RTU protocol, it can connect to the digital system directly (MB-200-ION serial only) l Two channel isolate current DC 0/4-20mA with programable according to ppm, mg/l,Temp (MB-200-ION serial only) |
| Parameters： | ||
| Range | 0.00~20000(ppm、mg/l)/ -2000.0~2000.0mV /-30.0~130.0℃ | |
| Resolution | 1/0.1/0.01(ppm、mg/l)/0.1mV/0.1℃ | |
| Accuracy | ±0.06%±1Digit/±0.02℃±1Digit With manualcorrection function | |
| Reproducibility | ±0.05% ±10% of reading(Depends on ISEsensor and sample ) | |
| Digital filtering | 0...60 seconds adjustable / factory setting 30 | |
| Temperature compensation | Automatic recognition with Pt1000/NTC30K or manual | |
| Correction mode | Two or three-point calibration, offset correction (providing threezones Section optional) | |
| Hi/Lo Relay Output | 2 sets Hi/Lo programmable,N/OFF, 240VAC/ 0.5A Max | |
| Analog Output | 2 sets of programmable & isolate current DC 0/4-20mA withprogramable according to ppm, mg/l,Temp. Max. load 500Ω . | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 96mm×96mm×138mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 91mm×91mm (H×W) | |
| Weight | 0.4Kg | |