MB-300-TB-2 Turbidity/Sludge Concentration (MLSS) Transmitter Suspended Solid
TURB-1100 Turbidity/Sludge Concentration (MLSS) Transmitter Suspended Solid
Application area ：
1，Chemical process；2，Recycle & cleaner；3， Drinking & surface water measurement ；4，Water & waste water treatment 。
Instructions Color
| Features： |
l 144X144 microprocessor turbidity/suspended solid ,MLSS transmitter l Waterproof & dustproof proof design, to fit wall/pipe installation l Automatic sensor clean function with programable time interval and hysteresis l Large LCD display, it can show the operation status and symbols l With backlight sensor, automatic and manual backlight setting function l 5 points auto. Calibration; single point calibrationcan be according to lab. or field analysis and adjustable l With password and multi-key design/security protection enhancement l Stainless steel electrode housing design with scratch resistant lenses l Without color , bubbles interfere with built-in automatic cleaning system l 90 degree angle optical monitoring principles designed to meet the US EPA and ISO7027 l Equipped RS-485 MODBUS RTU protocol, it can connect to the digital system directly (MB-300-TB-2 serial only) l Two programmable output (MB-300-TB-2 serialonly) |
| Parameters： | ||
| Turbidity | NTU,FTU,FNU | |
| Suspended solids | ppm,mg/l | |
| MLSS | g/l | |
| range | Depending on the electrode | |
| Resolution | AUTO（0.01,0.1,1） | |
| Hi/Lo Relay Outpu | 2 sets Hi/Lo programmable,N/OFF, 240VAC/ 0.5AMax | |
| Analog Output | 1 or 2 sets of programmable & isolate current DC 0/4-20mA with programable according toTurb./SS/MLSS. | |
| Wash Relay Output | ON: 0...9999sec. / OFF: 0...999.9hours | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 144mm×144mm×115mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 138mm×138mm (H×W) | |
| Weight | 0.8Kg | |