MB-300-ION Ion Concentration Transmitter
ION-7100 Ion Concentration Transmitter
Application area ：
For monitoring wastewater treatment and effluent of semiconductor, solar panel and LCD industries
Instructions Color
| Features： |
l 144*144 Microcomputer design ion concentration transmitter l Waterproof & dustproof proof design, to fit wall/panel/pipe in stallation l Automatic sensor clean function with programable time interval and hysteresis l Large LCD display, it can show the operation status and symbols l Automatic calibration; manual/auto. temperature compensation l With password and multi-key design,security protection enhancement l Equipped RS-485 MODBUS RTU protocol, it can connect to the digital system directly (MB-300-ION serial only) l Two programmable output (MB-300-ION serialonly) |
| Parameters： | ||
| Range | 0.00~20000(ppm、mg/l)/ -2000.0~2000.0mV /-30.0~130.0℃ | |
| Resolution | 1/0.1/0.01(ppm、mg/l)/0.1mV/0.1℃ | |
| Accuracy | ±0.06%±1Digit/±0.02℃±1Digit With manualcorrection function | |
| Reproducibility | ±0.05%/ ±10% of reading（Depends on ISEsensor and sample ) | |
| Digital filtering | 0...60 seconds adjustable / factory setting 30 | |
| Temperature compensation | Automatic recognition with Pt1000/NTC30K or manual | |
| Correction mode | Two or three-point calibration, offset correction (providing threezones Section optional) | |
| input resistance | >10^12Ω | |
| Hi/Lo Relay Output | 2 sets Hi/Lo programmable,N/OFF, 240VAC/ 0.5A Max | |
| Analog Output | 1 or 2 sets of programmable & isolate current DC 0/4~20mAwith programable according to DO、Temp. Max. load 500Ω . | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 144mm×144mm×115mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 138mm×138mm (H×W) | |
| Weight | 0.8Kg | |