MB-200-CN Conductivity Transmitter
COND-8300 Conductivity Transmitter
Application area ：
Widely used in waste water treatment, pure water, recycled water, boiler water systems And electronics, electroplating, printing and dyeing , chemical ,food, pharmaceutical and other process areas ,Large sewage treatment plants, industrial process monitoring applications such excellence.
Instructions Color
| Features： |
l 96X96 microprocessor conductivity transmitter l Waterproof & dustproof proof design, to fit wall/panel/pipe installation l The coductivity,resistivity,salinity can be measured l With backlight sensor, automatic and manual backlight setting function l Automatic sensor clean function with programable time interval and hysteresis l Large LCM display, it can show the operation status and symbols l It can be connected to two poles and four poles conductivity electrode l Provides digital filter function , can filter out interference value , to make the reading more stable l Automatic calibration; manual/auto. temperature compensation l With password and multi-key design、security protection enhancement. l Equipped RS-485 MODBUS RTU protocol, it can connectto the digital system directly (MB-200-CN serial only) l Two programmable output (MB-200-CN serial only) l TDS optional |
| Parameters： | ||
| Range/Resolution/Accuracy(±1Digit) | ||
| Conductivity | 0.000~200.0mS/cm /0.001uS/cm /±1%±1Digit | |
| Specific resistance | 0.000~20.00MΩ.cm/0.01MΩ.cm/±1%±1Digit | |
| Salinity | 0.0ppt~70.0ppt /0.1ppt /±1%±1Digit | |
| Temp | -30.0℃~130.0℃ /0.1℃ /±0.2%±1Digit;With manual correction function | |
| TDS | 0~19999ppm/0.001ppm/±1%±1Digit | |
| Electrode coefficient | 0.01,0.1,1,10.00 1/cm，0.0050~19.991/cm | |
| Temp. compensation | Automatic recognition with Pt1000/NTC30K or manual | |
| Temp. coefficient | Conductivity：Linear(0.00%...20.00%)or non-Linear ； Resistivity：non-Linear | |
| Hi/Lo Relay Output | Two sets Hi/Lo programmable,N/OFF, 240VAC/ 0.5A Max | |
| Analog Output | 2 sets of programmable & isolate current DC 0/4-20mA with programable according to cond. /res. / sal./Temp. Max. load 500Ω . | |
| Wash Relay Output | ON: 0...9999sec. / OFF: 0...999.9hours | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 96mm×96mm×148mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 91mm×91mm (H×W) | |
| Weight | 0.4Kg | |