MB-300-CN Conductivity Transmitter
COND-8100 Conductivity Transmitter
Application area ：
1，Industrial process ；2，Ferment process ；3，Recycle & cleaner ；4，Chemical process ；5，Drinking & surface water measurement ；6，Water & waste water treatment 。
Instructions Color
| Features： |
l 144X144 microprocessor conductivity transmitter. l Waterproof & dustproof proof design, to fit wall/panel/pipe installation. l The coductivity resistivity salinity can be measured. l With backlight sensor, automatic and manual backlight setting function l Automatic sensor clean function with programable time interval and hysteresis. l Large LCD display, it can show the operation status and symbols. l It can be connected to two poles and four poles conductivity electrode. l Automatic calibration; manual/auto. temperature compensation. l With password and multi-key design、security protection enhancement. l Equipped RS-485 MODBUS RTU protocol, it can connect to the digital system directly (MB-300-CN serial only) l Two programmable output (MB-300-CN serial only) l TDS optional |
| Parameters： | ||
| Range/Resolution/Accuracy(±1Digit) | ||
| Conductivity | 0.000~200.0mS/cm /0.001uS/cm /±1%±1Digit | |
| Specific resistance | 0.000~20.00MΩ.cm/0.01MΩ.cm/±1%±1Digit | |
| Salinity | 0.0ppt~70.0ppt /0.1ppt /±1%±1Digit | |
| Temp | -30.0℃~130.0℃ /0.1℃ /±0.2%±1Digit With manual correction function | |
| TDS | 0~19999ppm/0.001ppm/±1%±1Digit | |
| Electrode coefficien | 0.01,0.1,1,10.00 1/cm，0.0050~19.991/cm | |
| Temp. compensation | Automatic recognition with Pt1000/NTC30K or manual | |
| Temp. coefficient | Conductivity：Linear(0.00%...20.00%)or non-Linear ； Resistivity：non-Linear | |
| Hi/Lo Relay Output | Two sets Hi/Lo programmable,N/OFF, 240VAC/ 0.5A Max | |
| Analog Output | 1or 2 sets of programmable & isolate current DC 0/4...20mA with programable according to cond. /res. / sal./Temp. Max. load 500Ω. | |
| Wash Relay Output | ON: 0...9999sec. / OFF: 0...999.9hours | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 144mm×144mm×115mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 138mm×138mm (H×W) | |
| Weight | 0.8Kg | |
- Prev：
- Next：MB-200-CN Conductivity Transmitter